✓ Takes a sequence of 4 still photos if a movement is detected while the system is armed
✓ The first shot is taken instantly without a flash, and the next three (second by second) all with flashes
✓ Photographs compressed into JPG format are sent to the control panel by two-way radio (868 MHz)
✓ Control panel transfers the pictures out of the premises via GPRS or a LAN / PSTN communicator
✓ On average it takes about 15 seconds to get a picture from the detector to a secured Internet server or to your cell phone screen
✓ Picture resolution: 160 × 120 / B&W
✓ Built-in LED flash light illuminates the scene (up to 3 m)
✓ Powered by 2 3V lithium batteries (3 years lifetime)
✓ Internal picture memory stores the last 61 pictures with original BMP quality
✓ USB port allows you to view pictures directly from the internal memory (mass storage device feature)
✓ Detector can be used as part of an OASiS alarm system or simply as a stand-alone automatic camera
Built-in flash patented logic
The main task of the camera is to verify real alarms caused by an intruder.
The detector’s built-in flash illuminates the scene, but it also has other important functions:
✓ An unexpected flash attracts the intruder to look at the detector and this
significantly increases the probability that the next shot will show the intruder’s face
✓ A flash also clearly indicates to the intruder that (s)he was detected, possibly making him/her run away. If not, and (s)he tries to damage the detector, a tamper alarm is triggered. The tamper alarm verifies the intruder’s presence even faster than the photo transmission.
